|
| |
|
 |
| Train Control Systems is dedicated to
providing high quality Digital Command Control decoders and harnesses to
the DCC industry and EDM Models started stocking the range in May 2008. |
| At the moment only some of the range is
stocked but this will increase with each order placed. If there is a
particular decoder you want then we'd be happy to get it for you |
| T
Series HO Decoders |
Dimensions
0.956”x0.655”x0.207”
or
24.28mm x 16.63mm x 5.25mm
|
T1 |
|
An HO scale decoder a
9 pin socket. This decoder can be hardwired, plugged straight
into some locomotives, or connected to the 8-pin NMRA sockets
using a variety of the available harnesses. Provides 1.3 amp
continuous and 2 amp peak draw. The T1 features TCS exclusive
auto-adjusting BEMF. The T1 is a motor control decoder with two
lighting functions (headlight and reverse light)
|
|
T4X |
|
An HO scale decoder a
9 pin socket. This decoder can be hardwired, plugged straight
into some locomotives, or connected to the 8-pin NMRA sockets
using a variety of the available harnesses. Provides 1.3 amp
continuous and 2 amp peak draw. The T4X features TCS exclusive
auto-adjusting BEMF. The T4X is a motor control decoder with
four lighting functions (forward/reverse light, and two extra
functions)
|
|
T6X |
| An HO scale decoder a 9 pin
socket. This decoder can be hardwired, plugged straight into
some locomotives, or connected to the 8-pin NMRA sockets using a
variety of the available harnesses. Provides 1.3 amp continuous
and 2 amp peak draw. The T6X features TCS exclusive
auto-adjusting BEMF. The T6X is a motor control decoder with six
lighting functions (headlight, reverse light, and 4 extra
functions)
|
|
|
M Series HO & N
Scale Decoders |
| A small hardwired decoder series for HO & N scale. Provides
1 amp continuous and 2 amp peak draw. Dimensions |
Dimensions
0 .567”x0.359”x0.135”
or
4.4mm x 9.12mm x 3.43mm
|
M1 |
|
The M1 is a micro,
hardwire HO & N scale decoder. This decoder can be hardwired, or
purchased with a few 8 pin NMRA harnesses attached. Provides 1
amp continuous and 2 amp peak draw. The M1 features the TCS
exclusive auto-adjusting BEMF.
The M1 is a motor
control decoder with two lighting functions (headlight and
reverse light)
|
|
M3 |
|
The M3 is a micro,
hardwire HO & N scale decoder. This decoder can be hardwired, or
purchased with a few 8 pin NMRA harnesses attached. Provides 1
amp continuous and 2 amp peak draw. The M1 features the TCS
exclusive auto-adjusting BEMF.
The M3 is a motor
control decoder with three lighting functions (forward/reverse
light, and one extra function)
|
|
M4 |
| The M4 is a micro, hardwire HO &
N scale decoder. This decoder can be hardwired, or purchased
with a few 8 pin NMRA harnesses attached. Provides 1 amp
continuous and 2 amp peak draw. The M1 features the TCS
exclusive auto-adjusting BEMF.
The M4 is a motor control decoder with four
lighting functions (headlight, reverse light, and 2 extra
functions)
|
|
|