Welcome to the Economy Rolling Road Page.
Please accept my apologies for this page being a bit bare and a work in progress. At the moment all the pictures and details are of the HOn3 rolling road. I will be adding more details over time with details and pictures of the other scales and gauges.
| N Scale, 9mm Gauge, also for 009 | ||
| H0n3 Scale, 10.5mm Gauge |
|
|
| 0n2 Scale, 1/2" Gauge | ||
| 0n30 & HO Scale, 16.5mm Gauge | ||
| 0n3 Scale, 3/4" or 19mm Gauge |
More details soon
The standard length HOn3 Economy Rolling Road has the following dimensions: -
Overall Length 330mm
Active Length 300mm
Width 41mm
Height 15mm
The standard unit comes with 8 rollers. Extra rollers can be ordered separately, e-mail for details.
The rolling road unit comes with a pair of wires attached to the aluminium rails ready for you to connect to your controller. The unit is equally happy connected to DC or DCC controllers.
Note the handy feature of the extended sides to the roller units making them easy to adjust whilst an outside frame loco sits on the rollers.
The
HOn3 Rolling Road is only available in the economy range as the Deluxe range
rollers don't go small enough to accommodate the smaller gauges.
To order click this link
Warning: Please ensure that the power to your rolling road is connected through some form of short circuit protection as a loco not properly on the rollers can cause a short. Most controllers have this feature as standard but of course I can tell a tale. At the Santa Clara convention in 2004 I ran the models on rechargeable batteries with no protection.
More details soon
More details soon
More details soon