|
The kits in this first section are
complete except for paint, adhesive and couplings |
|
 |
PW2
Freelance 3
Compartment Coach
|
|
|
|
PW22
Freelance
5 Comp Coach
|
|
|
|
PW46
Bogie Workman's coach
|
|
|
 |
PW3
Freelance
11/2Comp Brake Coach
|
|
 |
PW23
Freelance
4 Comp Brake Coach
|
|
 |
PW114
Freelance Outside Wooden Framed Bogie Goods
Van
Trucks not included |
|
|
|
"Trent Valley"
Series Freelance Coach kits
|
|
These coach kits require seats [PW10M,
PW25 & PW26 are suitable], couplings paint and adhesive to
complete |
|
 |
PW17
`Trent Valley' 3
Compartment Coach
4 Wheel coach,
matchboard sides, no seating
|
|
|
 |
PW19
`Trent Valley'
Vestibule Saloon Coach
Bogie coach,
matchboard sides, no seating
|
|
|
 |
PW21
`Trent Valley'
Open Saloon Coach
4 Wheel coach,
matchboard sides, no seating
|
|
 |
PW34
`Trent Valley' 3
Comp Coach
4 Wheel coach,
panelled sides, no seating |
|
|
|
PW36
`Trent Valley'
Vestibule Saloon Coach
Bogie coach,
panelled sides, no seating
|
|
|
|
PW38
`Trent Valley'
Open Saloon Coach
4 Wheel coach,
panelled sides, no seating
|
|
|
|
PW44
Long Open Saloon Bogie Coach
[Vertical Matchboard sides]
|
|
|
|
|
|
|
 |
PW18
Trent Valley'
Full Brake Coach
4 Wheel coach,
matchboard sides, no seating
|
|
 |
PW20
`Trent Valley' 2
Comp Brake Coach
4 Wheel coach,
matchboard sides, no seating
|
|
 |
PW35
`Trent Valley'
Full Brake Coach
4 Wheel coach,
panelled sides, no seating
|
|
|
|
PW37
`Trent Valley' 2
Comp Brake Coach
4 Wheel coach,
panelled sides, no seating
|
|
|
|
PW45
Long Open Saloon Bogie Coach
[Panelled sides}
|
|
|
|
|
|
|
|
"Trent Valley" Narrow Gauge Coach Parts |
|
The "Trent Valley" range of coach parts are to a freelance design,
available with a vertical plank [matchboard] finish or a panelled finish
with beading around the panels. The idea behind them is that any pair of
sides can be matched to any of the ends to make your own type of coach, but
all to a similar style. To enable you to achieve this the parts are
available separately as TV1 to TV26 listed below:-
-
Sides are 124mm long and 40mm high plus a 1mm top chamfer up
to the back face.
-
Ends are 41mm high at the edges to match the back of the
sides, 46mm high in the centre and 41mm wide.
|
|
Matchboard
Finish (Vertical Planks) |
|
|
TV1
Pair of 3 Compartment sides
|
|
|
|
TV2
Pair of Full Brake sides
|
|
|
|
TV3
Pair of Vestibule Saloon sides |
|
|
|
TV4
Pair of 2 Compartment Brake sides
|
|
|
|
TV5
Pair of Open Saloon sides
|
|
| |
TV6
End with 2 large windows
|
|
| |
TV7
End without windows
|
|
| |
TV8
End with 2 narrow windows
|
|
| |
TV9
End with a centre door
|
|
| |
TV10
Saloon Partition or Gangway end
|
|
| |
TV11
2 pairs of doors to suit TV3 or TV16
|
|
| |
TV12
2 pairs of half height guards lookout sides
|
|
| |
TV13
2 pairs of full height guards lookout sides
|
|
| |
TV27
Pair of
long saloon sides |
|
|
|
Panelled
Finish with Beading |
|
|
TV14
Pair of 3 Compartment sides |
|
|
|
TV15
Pair of Full Brake sides |
|
|
|
TV16
Pair of Vestibule Saloon sides |
|
|
|
TV17
Pair of 2 Compartment Brake sides
|
|
|
|
TV18
Pair of Open Saloon sides
|
|
| |
TV19
End with 2 large windows
|
|
| |
TV20
End without windows
|
|
| |
TV21
End with 2 narrow windows
|
|
| |
TV22
End with a centre door
|
|
| |
TV23
Saloon Partition or Gangway end
|
|
| |
TV24
2 pairs of doors to suit TV3 or TV16
|
|
| |
TV25
2 pairs of half height guards lookout sides
|
|
| |
TV26
2 pairs of full height guards lookout sides
|
|
|
|
TV28
Pair of
long saloon sides |
|
|
|
|
|
