|
| |
|
MOUNT BLUE MODEL CO.
Precision
Engineered Model Railroad Kits |
|
REEDS
SECTION HOUSE From Maine's Sandy River &
Rangeley Lakes Railroad |
 |
Based on
on-site drawings and actual measurements of the restored
building. Easy to assemble. Laser-cut basswood, plywood, and
chipboard, with peel and stick trim parts and paper
shingles. With correct 4" (3/32") reveal siding. 6" (1/8")
reveal siding (shown in photo) is also available.
Building
footprint is 4" x 4 1/4".
| Kit # 1001 (4"
siding) £29 |
|
| Kit # 1001-a (6" siding)£29 |
|
|
|
REEDS
SECTION HOUSE - ' Up Front'
Series Kit |
 |
REEDS SECTION HOUSE - ' Up Front' Series
Kit Upgraded version of kit # 1001 features full,
accurate interior framing and inside wall sheathing
detail, 2cd floor, stairs, operational doors and
windows.
Interior framing consists of one piece
peel and stick cuttings for each wall.
Jigs included for easy window, stairs,
and rafter assembly.
|
Kit # 1002
(4" siding) £38.50 |
|
| Kit # 1002-a (6" siding) £38.50 |
|
|
|
 |
|
REEDS
MILLS DEPOT-
On the Sandy River & Rangeley Lakes |
 |
Laser-cut plywood and basswood with peal and stick
parts. Battens are done as one peal and stick panel per
side. Platform can be built as shown or flat.
Includes interior walls and floors, cast chimney, peal and
stick paper shingles, plastic glazing, and fully illustrated
instructions.
Footprint is 10 3/4" x 6" including platform. Add 1" to
width for rear roof overhang.
|
|
|
24' BOXCAR
SHED an 'up front' series kit |
 |
One of our early SRRR 24' boxcars used
as a line side shed just as the SR&RL did in the 1910's. Kit
includes full underbody and interior framing details, cast brass
door hardware for the working side doors, 2 sided etchings, and
etched roof panel lines.
Footprint is 6" x 1 1/2". An O scale kit
|
|
24' BOXCAR
SHED Basic version. |
 |
One of our early SRRR 24' boxcars used
as a line side shed just as the SR&RL did in the 1910's. Kit
includes cast brass door hardware and etched roof panel lines.
Easy to assemble. Non-working doors, no interior or underbody
detail.
Footprint is 6" x 1 1/2". An O scale kit #
1004-a
|
|
| |
|
BIGELOW DEPOT
Early as built version. |
 |
Former Portland Loco Works kit.
Laser-cut basswood walls, plywood
windows, doors, and trim, chipboard roof. Craft paper shingles
and printed signs. Building can be built without the bay window
as the wall behind is blank.
O scale kit #1010
tba
|
|
ALNA CENTRE
STATION from the Wiscasset & Quebec /
Wiscasset, Waterville, and Farmington Railway. |
 |
Former Banta Model Works and Portland Locomotive Works kits.
Laser -cut plywood, basswood, and paper shingles. Etched nail
head detail on platform sides. Peal and stick trim parts. Also
includes white metal stove pipe. Option of building as a tool
house with larger door.
O scale kit #1011-O
Footprint is 4-1/2" x 3- 5/8" wide.
|
|
|
The Classic
Post 1850 NEW ENGLAND FARMHOUSE
Seen all over the
north-eastern US in every town and village. Our kit depicts a
smaller version with a back ell kitchen. |
 |
A must have for the New England modeller
of any era. Optional bay window, front door canopy, and canopy
brackets. Kit consists of laser-cut clapboard siding, basswood,
1/64" 'laserboard' w/peal and stick, chipboard, peal and stick
paper shingles or 'steel' roofing, plastic chimneys, and mylar
glazing. Foundations are wood with etched brick detail. All trim
and windows are cut from 1/64" 'laserboard' so there is no grain
going in the wrong direction.
Kit as shown at left w/ front door on
left, steel roof and 3 window bay window:
Footprint: 4
5/8" x 12"
|
 |
Kit as shown at left with front door on right, 'asphalt'
shingles, 2 window bay window, cellar windows:
Footprint: 4 5/8" x 12"
Please note,
We haven't yet received a stock of these kits and the price it
therefore provisional and may change
|
|
Small
Carriage House (Barn) |
 |
This is a small version of
a Greek Revival style New England carriage house. These
structures were built as stand-alone or incorporated into a
connected structure complex.
Kit consists of the same materials as
the NE Farmhouse kit #1012. Included are 2 styles of 'barn' door
and an optional hay loft door. Lower foundation is wood with
etched brick detail.
Kit as shown at left with barn door on
the left and steel roof:
|
 |
Kit as shown at left with
barn door on the right and 'asphalt' shingle roof:
O scale Kit #1013Ob
Footprint: 4 1/2" x 6"
Please note,
We haven't yet received a stock of these kits and the price it
therefore provisional and may change |
|
The Post 1850
New England Connected House |
 |
The Post 1850 New England
Connected House This is the 'in-town' version of the New England
connected Farmhouse complex as seen all over the north-eastern
US. A must have for the New England modeller of any era. This
kit consists of our New England Farmhouse and Small Carriage
house. These buildings have a low brick foundation as well as
the optional parts found in the farmhouse and carriage house
kits.
Kit as shown at left with dooryard on
left and steel roof:
Footprint: 8" x 17 1/2"
|
 |
Kit as shown at left with
right dooryard and 'asphalt' shingle roof:
Footprint: 8" x 17 1/2"
Please note,
We haven't yet received a stock of these kits and the price it
therefore provisional and may change |
|
| |
|